HDMI Wireless Transmitter and Receiver,HDMI Wireless Extender 5G Transmission video sender WIFI 200m/ 656ft Kit with IR Pass Through 1080P@60Hz Full HD full House Coverage Plug and Play

Technical parameters:
Support protocol: HDMI 1.3, HDCP 1.2.
Video compression format: H.264
Pixel bandwidth: 165MHz, all numbers
Interface bandwidth: 6.75Gbps
Maximum supported resolution: 1920×1080P @ 60Hz
Impedance: 100Ω
Recommended maximum HDMI input/output ratio: less than 5 meters, 1920X1080P@60HZ resolution
Infrared interface: 3.5mm jack
Infrared signal direction: one-way transmission
Infrared input level carrier frequency: 20–60KHz
WIFI RF power: 802.11ac
Radio frequency: 2.4GHz/5GHz
Transmission range: 200M
Power: DC 12V
Maximum current consumption: MAX 9W
Working temperature: -5°C-+70°C
Humidity: 5%-90%
Size: 112*79*28mm
Support infrared remote control remote expansion, display remote source equipment, easy to install, plug and play
Packing list:
HDMI extended transmitter (TX)* 1
HDMI extension receiver (RX)* 1
2.4G / 5G dual-band antenna* 2
PSU * 2
IR infrared transmitter* 1
IR infrared receiver* 1
User Manual* 1
Product pairing steps:
1. Connect the HDMI output of the transmitter to the HDMI input of the receiver with an HDMI cable;
2. At this time, IR and IR output may not be connected;
3. Connect the transmitter and receiver to the power supply respectively;
4. Wait until the green “Sta” indicator lights up, first press the “Reset” button on the transmitter, and then press the “Reset” button on the receiver;
5. At this time, the green “Sta” transmitter and receiver flash 6 times, and then flash continuously, indicating that the pairing has been successful.

The HDMI wireless signal of this product can reach a maximum distance of 656ft. In an open field, it can transmit 10-50m/32ft-164ft through a single wall signal (up to 30m and 98ft through a wooden wall and a glass wall). Automatic matching without setting, true plug and play. The picture is clear and stable, and the sound quality is high.
★ HDMI resolution supports 480i / 576i —- 1080P @ 50 / 60Hz, SVGA — WUXGA supports a variety of common computer resolution, OSD display, timely understanding of device status
★ Accept 2.4G / 5G international wireless dual-frequency transmission signal, fast transmission speed and strong filtering ability
★ Support infrared remote control remote expansion, remote source device display, pure hardware mode, plug and play, free computer installation driver connection, support Mi configuration interface, easy to use.
★ Compatible with most HDMI-enabled devices such as DVD, DVR, IPTV, CCTV, Blu-ray players, set-top boxes, cable TV, satellite and computer systems. We support 90 days no reason to replace or refund, if you have any questions, please contact us by email, we will reply you within 8 hours.